EM53 - SCRAPER WITH DREDGING CHAIN FOR RECTANGULAR TANK

Application Clarifying of primary and secondary waste water
Characteristics The equipment consists of a dredging chain with bottom and surface scrapers.
Operation The waste water is clarified in a rectangular tank, the sedimentable solids settle on the tank bottom and are conveyed to a hopper by the bottom scrapers, while the floating material is conveyed into an oil removal pipe.
Materials Hot dip galvanized carbon steel or Stainless steel
Installation In a concrete tank
Tank diametre From 2 to 16 m.
Tank length From 20 to 100 m.
Optionals Scum removal system

 

PRINCIPLES OF SIZING

Hydraulic sizing (process)
The sizing of the feeding zone is based on the following parametres: • influent flow rate • dimensions of the pipings The water flowing to the sedimentation zone must have a very low kinetic energy in order to guarantee a good separation and settling of the solids.

 

Mechanical Sizing
The sizing of the scrapers is based on the type of sludge to be evacuated from the tank bottom. Normally the scrapers, shafts and chains are designed to bear a stress of 20 Kg. per linear metre.

 

Torque limiting device (dynamometric cell) 
The dynamometric cell measures the torque transmitted by the drive unit. This value is evident directly on the instrument and allows to evaluate the stresses on the moving members during the rotation. The device is equipped with limit switches set at two different torque values, one for alarm and one for the machine shutdown.

 

Checks
The movement of the chains must be carefully checked because it is very important for this type of machine.
For this purpose, we use to apply some sensors to check the idle shafts rotation.

FaLang translation system by Faboba